What you need to flash. You need the image file you want to flash. Image files have the extension *.nfi. You can't flash other images like *.img files. Flashing a new firmware by Browser What you need to flash You need the image file you want to flash. Image files have the extension *.nfi. Is these same files are.

Reggae sample pack free. What you need to flash You need the image file you want to flash. Image files have the extension *.nfi. You can't flash other
images like *.img files.

Don't try it - it won't work. You need either a DHCP server, a configured bootloader or a serial cable and a terminal program
like HyperTerm. You need a browser, and a network cable. If you connect the Dreambox directly to the PC,
you need a cross cable, if you connect trough a switch/hub/router you need a normal
(non-cross) cable. To flash a new image, you can use the second stage loader. It must be present and not broken.

The following steps assume you have a DHCP server. If you don't have one, you have to (klick) in the bootloader's serial setup. - Power down the Dreambox, either using 'shutdown' (to enter the deep-standby mode) or by using the power-switch. Standby is not enough! (1.) Press and hold the lower frontpanel button.

(2.) Switch on the dreambox, either by using the powerswitch or, in deep-standby mode, press the power button. Still, hold the lower button. (3.) A text '*** STOP ***' should appear. If something like '/flash'. Appears, you didn't hold the right button. Now you can release the button.

The bootloader entered the 'waiting' mode. (4.) Above the '*** STOP ***' text, there should appear an IP-address (four decimal values with a dot in between). If there appears the string 'dhcp' instead, the box still searches for a DHCP server. Wait a bit.

If it doesn't change, something doesn't work with the DHCP server. Check wether network cable is plugged in etc.

If it just doesn't work, using the serial terminal - Now, open a browser on your PC. (1.) enter in the address line '(where ip must be replaced with the value in the LCD). (2.) on the bottom of the page, there's a link called 'firmware upgrade'. - On the next page, you can select the flash image you want to flash.

Be sure that it has the '.nfi' extension. You can't flash other images (like.img)! - Click on 'FLASH!' It might take some time to upload and flash the image.

- Switch the box off again, and on again. The new image should be flashed and working.

Flashing a new firmware by Browser What you need to flash You need the image file you want to flash. Image files have the extension *.nfi. Installshield cab file viewer 140. You can't flash other images like *.img files. Don't try it - it won't work. You need either a DHCP server and a configured bootloader You need a browser and a network cable. Connect your Dreambox to a switch/hub/router in your lokal LAN. To flash a new image, you can use the second stage loader.

It must be present and not broken. The following steps assume you have a DHCP server.

If you don't have one, you have to (klick) in the bootloader's serial setup. - Power down the Dreambox, either using 'shutdown' and by switching off by the power switch. Standby is not enough! - (1.) Press and hold the power button.

- (2.) Switch on your Dreambox. - (3.) Your Dreambox will get the next free DHCP IP address from your router.

- Now, open a browser on your PC. (1.) enter in the address line '. - (2.) on the bottom of the page, there's a link called 'firmware upgrade'.